• 4.9/5.0 from 128+ Reviews

Port Melbourne Heater Repair

Blowing cold? Won't ignite? Our licensed technicians get you warm again fast.

  • Same-Day Heater Repair
  • ARCtick (AU49053)
  • 10+ Years of Experience
BOOK A SERVICE
1300 730 896
When the heating fails in Port Melbourne, we move fast. A licensed technician runs a full diagnosis, explains the fault plainly, and repairs it safely with your say-so.
On time, guaranteed

We started out servicing a national telco and two of Australia's largest insurers. The reliability built for them now backs every Port Melbourne heater repair we do.

Fully Insured & Gas Licensed

We are one of Australia's only genuinely national HVAC providers, with gas-licensed and ARCtick-certified technicians on call for Port Melbourne, even through a bitter mid-winter cold snap.

Confirmed Same-Day or Next-Morning

Most heater repairs are confirmed same day or next morning. We cover Port Melbourne and the surrounding suburbs 7 days a week.

Heater Repairs Across Port Melbourne | Gas Licensed & Carbon Monoxide Safe

A dead heater on a frosty winter night is not something a Port Melbourne household should have to wait days for. We get to you fast, diagnose the real cause rather than the symptom, and repair gas ducted, wall furnace, hydronic, gas log and reverse cycle systems, with upfront pricing and a carbon monoxide check on every gas repair.
  • Gas-licensed, ARCtick-certified technicians
  • Average response time under 2 hours across metro Port Melbourne
  • Carbon monoxide safety check included on every gas repair
Who We Are

What Every Port Melbourne Heater Repair Covers

A Port Melbourne heater repair with us means a genuine diagnosis and a safe, lasting fix. Here are the four steps every visit covers, always with a fixed quote before we start.

Full Fault Diagnosis

We diagnose properly first in every Port Melbourne home, reading codes and testing the whole system to isolate the true fault. Then we explain it plainly and quote a fixed repair price before starting.

Ignition & Gas Component Check

When a Port Melbourne heater gives no ignition, a dropping pilot or short-cycling, the igniter, flame sensor, gas valve or board is normally to blame. We test each component, confirm the fault and replace it with quality parts.

Carbon Monoxide Safety Test

On every Port Melbourne gas heater repair we test for carbon monoxide and inspect the heat exchanger for cracks. If we find a safety risk, we tell you straight away and never leave an unsafe appliance running.

Performance Test & Sign-Off

Once repaired, we run full heating cycles, check airflow and outlet temperatures, and confirm your Port Melbourne system is heating correctly and operating safely before we pack up.

Gas Ducted & Wall Furnace Heater Repairs in Port Melbourne

Gas ducted and wall furnaces are what we repair most across Port Melbourne. Whether it won’t fire up, cuts out mid-cycle or throws air that never gets warm, we find the cause and repair on the spot where parts allow.
  • Service all major brands: Brivis, Bonaire, Braemar, Pyrox
  • Ignition, flame sensor, gas valve and control board diagnostics
  • Carbon monoxide testing on every gas repair

ARCtick Certified · Fully Insured · 10+ Years of Service

1300 730 896

Hydronic, Gas Log & Reverse Cycle Heater Repairs in Port Melbourne

Plenty of Port Melbourne homes heat with hydronic, gas log fires or reverse cycle instead of ducted gas, and each fails in its own way, from seized pumps and leaking valves to dead compressors and faulty thermostats. We repair all three from end to end and performance-test before packing up.
  • Service all major brands: Daikin, Mitsubishi Electric, Rinnai, Regency
  • Pump, valve, burner, thermostat and control board repairs
  • Every repair carries our 100% workmanship guarantee

ARCtick Certified · Fully Insured · 10+ Years of Service

BOOK A SERVICE

Not Sure If It's Worth Repairing?

If your heater won't ignite, blows cold, smells of gas, keeps shutting off or is flashing an error code, do not tough it out in the cold. Call us and we will diagnose the fault and give you an honest repair-or-replace recommendation, with no pressure either way. If we ever detect a gas or carbon monoxide risk, we shut it down and tell you on the spot.

Book a Service 1300 730 896

QuickAir flat-rate pricing table. Toggle to switch between new and returning customer prices.

Service Price (AUD)
Service & Preventative Maintenance$239
Additional unit (same visit)$239
Breakdown & Repair Assessment$239
Installation Quote
humm90 finance available
$239
Insurance Report$239
Extensive Cleaning$239
Relocation / Decommissioning Quote$239
Carbon Monoxide Test$239

Prices shown are starting rates and apply nationally. Final quote provided on-site based on the work required. Interest-free finance available through humm90 for installations and larger jobs.

Every Major Heater Brand, Repaired in Port Melbourne

Authorised service agents for all major residential & commercial AC brands

How it Works

Booking your service shouldn’t be complicated. Here’s exactly how it works, from the moment you call to the moment our technician walks out the door.

Book your service

Book online or call us on 1300 730 896. Our team is available 24/7 and can usually confirm a same-day or next-morning slot.

Secure your booking

Pay the fixed service fee upfront by card to lock in your technician and time slot. No quoting back-and-forth.

We arrive & assess

A licensed technician arrives on time, inspects your unit, and walks you through the issue and pricing before any work begins.

Job completed

We finish the job with your approval, tidy up, and back the work with our 100% workmanship guarantee.

Licensed Tech across Australia
0 +
Happy Customers Served
0 +
Years of Enterprise Operations
0 +
What Customers Say

Trusted by homeowners across Australia.

4.9
128 Google reviews
View all reviews on Google
A heater that won’t fire is usually a failed igniter, flame sensor, gas valve or board. We run a full diagnosis at your Port Melbourne property, pinpoint the fault, and give you a fixed price up front.
Yes. A reverse cycle that won’t heat is often a reversing valve, sensor, low refrigerant or a control fault. We diagnose the exact cause and repair it, so you get heating and cooling back from the one unit.
This often points to an ignition fault, a failed gas valve or a thermostat problem, so the fan runs but the burner never fires. We identify the failed part and quote the fix on the spot.
Yes. Every gas heater repair includes a carbon monoxide test and a heat exchanger inspection. If we find a crack or a leak, we shut the unit down and tell you immediately.
You pay a fixed diagnostic fee to book, and once we have found the fault we give you a fixed repair price before any work begins. No hourly charges and no surprises.

Frequently Asked Questions

Got a question before you book? These are the things Port Melbourne homeowners ask us most about heater repair. If yours is not covered, call us on 1300 730 896 and we will talk it through.
Contact Us

6-Months Interest-Free Finance Available

Big repair or new install? Spread the cost with 6 months interest-free through Humm90. Most applications are approved the same day over the phone, our team will walk you through it. Learn more on our finance page

Areas We Cover Around Port Melbourne

Suburbs we service include:

Don’t see your suburb? Call us on 1300 730 896, we likely cover it.

Berwick, Blackburn, Boronia, Box Hill, Brighton, Broadford, Brunswick, Brunswick West, Bundoora, Camberwell, Carnegie, Carrum Downs, Caulfield, Caulfield North

Get Your Heating Back On Today.

Get a gas-licensed Port Melbourne technician out today, upfront pricing and a 100% workmanship guarantee.
Book a Service Today!