Most people think purchasing a larger AC unit might help make the house even cooler. But frankly, you are only exposing yourself to air conditioner problems. In fact, air conditioner installation when your AC is too big can result in various issues. What do I mean? Well, here are some of the problems you might face from choosing an oversized AC.
1) Higher electric bill
During that hot season, we tend to spend more on electric bills than usual. That’s because the AC is almost always running round the clock. The unfortunate part is that you’ll have an even higher electric bill when using an oversized AC unit. The larger air conditioner needs to switch on and off more frequently, thus increasing the cost of running it by increasing the cycles.
2) Increased humidity
If humidity is already a problem, then the last thing you need is your unit to add to that. When you have the right-sized AC at home, the system runs with enough power to remove the excessive humidity. But if you have an oversized unit, the system will only run a few minutes at a time. On top of the humidity problem, you still have to worry about mould growth. Yes, that’s right! Excessive humidity creates the optimum environment for mould growth.
3) Hot spots throughout the house
Since your unit is oversized, there’s bound to be uneven cooling around your house. That leads to hot spots; because the air doesn’t disperse effectively. You’ll start to notice that your house is cool and comfortable in certain spots only.
4) The AC might not last
When purchasing an AC unit, it’s always good to go for the right size. The oversized air conditioner sometimes seems like the obvious choice, but it’s not. A larger unit will likely suffer from premature wear and tear. That’s because it works extra hard switching on and off more often – adding to the wear and tear of the unit. You’ll end up spending a lot on air conditioner repair.
5) The unit will cycle too often
At its optimum efficiency, the AC should have cycles between 7 and 10 minutes each. Anything lower than that is considered a short cycle, while anything more is a long cycle. With that in mind, any time your system experiences short cycles, the unit will be exposed to the dangers of overheating. That’s because the system is overworked.
It’s essentially caused by the on and off sequences that the air conditioner experiences. An oversized AC causes the system to have a short cycle when the initial cool air is introduced in the house. Even if you constantly do air conditioner maintenance, this system will end up overheating.
So, how do I determine the best size for my house?
Well, that’s pretty easy. The next time you decide to go for an AC unit, make sure your house has been measured first. Some homeowners are hands-on people and will likely take care of this on their own. But if you don’t know how to measure your home, you can always contact a professional. To be more specific, you can talk to QuickAir experts (Our website- https://getquickair.com.au) if you need any help with your AC. Or call us directly on 1300 730 896.